Analysis and optimization on the biodegradable plate making process parameters using RSM-based Box–Behnken Design method

Journal of Material Cycles and Waste Management - The present research work focused on fabricating Biodegradable Plate (BD plate) composed of rice husk ash, bagasse and corn starch which is...     

Challenges for modelling and integrating environmental performances in concept design: the case of an automotive component lightweighting

The objective of this paper is to discuss the main barriers for modelling and integrating the environmental performances in the automotive concept design. Incorporating environmental assessment in the early design phase of a vehicle component is known as an important challenge that car makers need to face in order to develop more sustainable design solutions; in this regard, the Life Cycle Assessment is the most widespread methodology for the environmental assessment and comparison of alternatives. The present work illustrates the combination of such methodology with the traditional design procedure at two different levels of the component design phase, material choice and concept design. In particular, the potential benefits originated by a lightweight solution for the automotive component Throttle Body are evaluated by considering environmental and technical implications at the same level. The case study shows that a multi-disciplinary approach for design effectively allows the integration of the environmental issue in the company’s established procedures. However, interpretation of results is still a challenging aspect due to the inevitable contradicting elements which should not discourage to develop comprehensive sustainability assessment within the early design stage.     

The Response of Hydrophytes to Environmental Pollution with Heavy Metals

The effects of Cu²⁺, Cd²⁺, and Ni²⁺ at low and high concentrations (0.025 and 0.25 mg/ml) on the accumulation capacity, the state of the pigment complex, and photosynthesis rate have been studied in model experiments with three floating hydrophytes (Hydrocharis morsus-ranae L., Lemna gibba L., and Potamogeton natans L.) and four submerged hydrophytes (Elodea canadensis Michx., Lemna trisulka L., Ceratophyllum demersum L., and Potamogeton lucens L.). Copper and cadmium are especially toxic at the concentrations studied. The effect of Cu²⁺ was the strongest in hydatophytes, and the effect of Cd²⁺, in pleustophytes. It is hypothesized that the differences between hydrophytes with respect to accumulation of metals and decrease in photosynthesis rate may cause predominant elimination of submerged species. Therefore, changes in the species structure of hydrophyte communities may be expected in waters polluted with metals.     

Experience in quantitative analysis of floristic structure and diversity in Samarskaya Luka

Quantitative methods have been applied to the study of floristic structure and diversity in Samarskaya Luka. The results show that Samarskaya Luka is a floristically heterogeneous area in which six elementary floras can be distinguished. This area has been assessed as a floristically autonomous formation, and its floristic representativeness was estimated.     

Estimating sampling frequency in pollen exposure assessment over time

A time series model was fitted to the pollen concentration data collected in the Greater Cincinnati area for the Cincinnati Childhood Allergy and Air Pollution Study (CCAAPS). A traditional time series analysis and temporal variogram approach were applied to the regularly spaced databases (collected in 2003) and irregularly spaced ones (collected in 2002), respectively. The aim was to evaluate the effect of the sampling frequency on the sampling precision in terms of inverse of standard error of the overall level of mean value across time. The presence of high autocorrelation in the data was confirmed and indicated some degree of temporal redundancy in the pollen concentration data. Therefore, it was suggested that sampling frequency could be reduced from once a day to once every several days without a major loss of sampling precision of the overall mean over time. Considering the trade-offs between sampling frequency and the possibility of sampling bias increasing with larger sampling interval, we recommend that the sampling interval should take values from 3 to 5 days for the pollen monitoring program, if the goal is to track the long-term average.     

A two-stage cyclone using microcentrifuge tubes for personal bioaerosol sampling

Personal aerosol samplers are widely used to monitor human exposure to airborne materials. For bioaerosols, interest is growing in analyzing samples using molecular and immunological techniques. This paper presents a personal sampler that uses a two-stage cyclone to collect bioaerosols into disposable 1.5 ml Eppendorf-type microcentrifuge tubes. Samples can be processed in the tubes for polymerase chain reaction (PCR) or immunoassays, and the use of multiple stages fractionates aerosol particles by aerodynamic diameter. The sampler was tested using fluorescent microspheres and aerosolized fungal spores. The sampler had first and second stage cut-off diameters of 2.6 microm and 1.6 microm at 2 l min(-1)(geometric standard deviation, GSD = 1.45 and 1.75), and 1.8 microm and 1 microm at 3.5 l min(-1)(GSD = 1.42 and 1.55). The sampler aspiration efficiency was >or=98% at both flow rates for particles with aerodynamic diameters of 3.1 microm or less. For 6.2 microm particles, the aspiration efficiency was 89% at 2 l min(-1) and 96% at 3.5 l min(-1). At 3.5 l min(-1), the sampler collected 92% of aerosolized Aspergillus versicolor and Penicillium chrysogenum spores inside the two microcentrifuge tubes, with less than 0.4% of the spores collecting on the back-up filter. The design and techniques given here are suitable for personal bioaerosol sampling, and could also be adapted to design larger aerosol samplers for longer-term atmospheric and indoor air quality sampling.     

Dust Storms are an Indication of an Unhealthy Environment in East Asia

Dust storms frequently occur in Mongolia and in northern China. Each year there are 30 to 120 dusty days in source regions of Mongolia and 14–20 dusty days on the Korean Peninsula. Intense sand storms and associated dust falls produce environmental impacts in East Asia. This paper discusses the environmental degradation in Mongolia and the social, economic and atmospheric impacts of dust storms in the sink area. The impact of dust storms on environmental compartments as well as their direct and indirect consequences to basic resources like water and energy demand and supply is explained. Governments are encouraged to take appropriate action in specified regions. For monitoring dust storms there is a need for international cooperation to combat growing environmental and human security concerns.     

Monitoring Biofilm Thickness Using A Non-Destructive, On-Line, Electrical Capacitance Technique

Abstact The present study was designed to evaluate indirect, non-invasive, on-line measurement of biofilm thickness using an electrical capacitance technique. Several assays were carried out and the results showed that, at a frequency of 1 kHz, electrical capacitance could be used to measure biofilm thickness indirectly (with a correlation coefficient of 0.9495). The reproducibility revealed by the assays was also highly satisfactory.However, in contrast to what was expected, there was an inverse relationship between electrical capacitance and biofilm thickness, i.e. electrical capacitance diminished with the increase in the biofilm thickness.The tests were also carried out at different frequencies (1 kHz, 10 kHz and 100 kHz)